Windshield wipers are a must-have accessory that helps you stay safe on the road. Wiper blades that have been neglected might cause problems during a sudden downpour, which is why they must be well maintained. 

Here are a few of the best windshield wiper maintenance tips to keep your wipers in tip-top shape:

Defrost and Scrape Before Using the Wipers

When there's a lot of snow or ice on the ground, windshield wipers tend to stick, and if you switch them on before defrosting the windshield, they'll snap.

Run the defroster first and scrape away any snow or ice if necessary in frigid temperatures. 

If you have an early morning commute, it's a good idea to warm up the car ahead of time using the defroster on high.

Replace the Blades at Least Twice a Year

Wiper blades are only meant to be used for six months. Following that, you'll notice a decrease in your driving vision. 

To help combat this issue, replace your batteries every six months and replace them on time. 

You should also look for evidence of early wear on the blades, such as smearing, skipping, or squeaking over the glass. 

The procedure is so simple that with a little experience, you can do it yourself.

Keep the Windshield Clean

Give your wipers a good cleaning if they're leaving streaks on your windshield. 

To remove the dirt, debris, and grime that accumulates over time, dampen a towel with rubbing alcohol and wipe it along the edge of the blades. 

To maintain your blades in good shape, clean them once a month.

Washing your car frequently also helps your wipers last longer by preventing dirt from accumulating in the first place. 

In the summer, bath your automobile at least twice a month, and more frequently in the cold and wet seasons.

Never Run the Wipers on a Dry Windshield

When the windshield is wet, windshield wipers are supposed to be used. 

Operating them on a dry surface might cause the wipers to wear out far faster than they should, resulting in additional costs. 

When cleaning a dry windshield, such as when there is dust accumulation on the glass, start by pressing the washer button. 

This will necessitate keeping your windshield washer fluid full up, which is something else to keep in mind as part of your wipers' routine maintenance.

Make sure the wiper arms are not loose

If you don't want your wiper blades to fall out of the car while you're driving, you should check the screws on the wiper from time to time. 

Given that the wipers work overtime in severe rains, this should be a significant check-point. 

Remove the plastic cap and slightly tighten the screws, being careful not to overtighten them.

Also Read:

Volkswagen Virtus Compact Sedan Makes Global Debut

New rule to regulate YouTube channels and OTT platform in Nepal

MG ZS EV 2O22 launched in Nepal

Hyundai launches IONIQ 5 in Nepalese market

Tata Tigor EV With ARAI Certified Range Of 306 Km Launched In Nepal

realme 9i launched in Nepal with Snapdragon 680 SoC

Suzuki Celerio: Nepal's Most Fuel Efficient Family Car Launched

When we clean windows, we find ourselves wiping for hours on end with no clarity. Glass will still seem fuzzy, with some visible streaks and a smear on the opposite end.

Here are some tips to keep your home windows shiny:

Use Cold Water

There's a controversy going on regarding whether you should clean your windows with warm or cold water. But consider it. Warm water evaporates fast, leaving mineral deposits on the glass.

Coldwater makes your windows clean. Moreover, all you get with cold water is clean, clean windows.

Use the Right Tools

To make your windows sparkle, you'll need the correct tools. The squeegee is the pinnacle of window washing instruments and a must-have for professional window cleaners.

You won't have to re-wipe previously cleaned areas using squeegees.

All you have to do is spray your cleaning solution on the glass windows, rinse with water, then wipe away with the squeegee.

Use the Proper Cleaner

The difference between clean, gleaming windows and a mess can be determined by the type of cleaner used.

Some window cleaners on the market today are often overly powerful, causing harm to your glass. Some industrial cleaners are still worthwhile, but they may be out of your price range.

If you don't have any professional cleaners, you may make your own by combining 1 part vinegar and 1 part tap water in a spray bottle for optimum cleaning power.

Remove Stubborn Water Stains

Water evaporates from a wet glass surface, leaving behind minerals that were previously dissolved in water.

This is referred to as hard water. Water with high calcium and magnesium content is referred to as hard water.

These deposits are what generate difficult-to-remove water stains on glass and other surfaces.

When dealing with hard water, there are numerous cleaning agents that you can use to clear away all mineral deposits like vinegar and kinds of toothpaste.

Also Read:

Things to Consider Before Applying Heat to Your Hair

Cleaning tips to reduce household dust

Things to Take Care of Before putting your Clothes in Washing Machine

Tips to get rid of period acne

Best exercise to do at home for men

Things to consider while using GPS Location-Sharing