Samsung Banner sticky Advertisement

Tips for long-lasting tyres

20th September 2020
"Tyres are sometimes the major expense of your car after fuel so ensure you get the full benefit of your investment."

Tyres are sometimes the major expense of your car after fuel so ensure you get the full benefit of your investment. It takes good maintenance and treatment to get the best out of your tyres. Once in 4-5 years, you will need a replacement. However, your tyre could easily be ripped down to shreds by the end of that time, if due care was not taken to it.

The following easy tips are not just a way to enhance your tyres' durability but also boost overall fuel economy, driving behavior and, perhaps significantly, your general safe driving.

Monthly check of tyre inflation

Too much-inflated tyres will unexpectedly bounce you around, poorly-inflated tyres cause you to lose handling characteristics and make your fuel expenses even more. What's even worse is that tyres that are significantly poorly-inflated can overheat and burst.

Look for the best pressure for your tyres, front and back. Don’t forget to check your tyres every month. You can even set a reminder if you have trouble remembering it.

 

Check your wheels for balance

When you get your tires rotated, you can also get your wheels balanced. And if you use a two-wheeler then need not do this, you can just do your tyre rotation. There's a heavy spot inside every tire and wheel. None of them is perfect, even though they are completely new. The gap is slight, estimated in 1 to 1⁄2 ounces. But vibration and uneven tire wear can be caused by that slight difference. Using a special device and small weights your technician can stabilize any wheel. As when the tire wears, the weight will need to be shifted or changed. It is a quick, easy cycle that costs far less than a new tire! Please ensure throughout rotation you have the balance of your tires tested and balanced.  

To preserve the life of your tyres, you need to minimize the repetitive and sudden braking. Sudden acceleration also leads to reducing tire’s wear similarly. Standard tyres, not ideal for power slides or burnouts. Even if you are enticed by the scent of burnt rubber, stop any of those gimmicks on your tyres. They put undue pressure on the tyres, reducing life faster than expected.

 

Always carry out pre-travel examinations

Before any ride, this should be something you do. The tires should always be provided with a pre-trip examination of key structures for road preparation. Test the tyre pressure, check at the condition of the tyres, and be prepared to tackle troubles before hitting the roadway to mitigate the damage.

Don't forget to carry a spare tyre!

 

Heavy loads

Motorcycles are light and heavy, and people either slim or obese. We may raise the tension of the tyres to accommodate more weight (within the prescribed edges) understanding this factor. If we add a traveler and a load to it, we should apply further pressure to the prescribed maximum limit to sustain this big load.

Anyway, aim to make the bike as light as possible. The heavier the load is, the more the damage is, so we can obey guidelines like emptying the saddle bars and the top case or removing them if we don't need it. We may also decrease the weight of the unwanted stuff taken from other boxes and the storage of the under the seat.

Also Read:

TOP SCOOTERS IN NEPAL 2020 | 125 CC | PRICE

TOP TEN CAR ACCESSORIES

2020 FORD ECOSPORT BS-6 LAUNCHED IN NEPAL

TOP 5 SUVS IN NEPAL IN 2020 | UPDATED PRICE

NEW UPCOMING ELECTRIC CARS IN NEPAL 2020

ELECTRIC VEHICLES | CARS | BIKES: ADVANTAGES AND DISADVANTAGES

PETROL VS DIESEL CAR: 5 THINGS TO LOOK BEFORE YOU CHOOSE 

Compiled by : Upasana Poudel Upasana Poudel

ThirdWheel Motorcycle App: The only third wheeler that cares.

7th May 2019
"ThirdWheel is an app that aids you at the time of emergency, service requests, and packages for subscription and bike accessories."

Imagine being a third wheel between a couple and not caring about what they are doing. But ThirdWheel is the only third wheeler who cares. It cares about you and your sweet ride and when your ride breaks down, the ThirdWheel will be third wheeling you within seconds.  

ThirdWheel is an app that aids you at the time of emergency, service requests, and packages for subscription and bike accessories.

It is easy to use with all the necessary information stated in the app itself.

 

How does it work?

1. Picking up your bike

ThirdWheel picks your bike and drops it at your destined location. Sometimes, you may have to attend the office or college anyhow and your bike desperately needs servicing. A small buzz in the mobile app and they will be third wheeling you within seconds.

2. Servicing

They claim themselves to be experts on automotive services. They will be providing reliable maintenance, reasonable price, quality assurance and customized care.

3. Delivery

They simply ask two questions.

1. When do you want your bike to be delivered?

2. Where do you want your bike to be delivered?

 

 

You just need to login and put your and your bike’s details and you are off to go. Stay tuned for the review of the app. We will make sure to use this app when our bike breaks down and need immediate help. This would be the only third wheel I would want.

 

 

 

  • Tags :
Compiled by : Debashish S Neupane Debashish S Neupane

Tips to Save Petrol in Bike | Minimize Fuel Consumption

20th October 2019
"Minimizing the petrol consumption is one of the major tricks to all the bike riders."

Bike and petrol are two parts of the same coin. The bike enthusiasts purchase a bike to travel up to their destination but petrol plays a huge part in their life. Minimizing the petrol consumption is one of the major tricks to all the bike riders.

Today we shall provide you with the tips to minimize petrol consumption for the bike.

Maintain Carburetor and filter of bike

The carburetor and filter should be regularly monitored and maintained. The dirt and dust around the city seem to collect around the carburetor passing the filter which obstructs the regular flow of petrol to the engine. This results in overconsumption of petrol in the bikes.

Carburetor-and-filter

Kill your engine when the bike is stationary

There are times such as traffic jams, traffic light, and important phone calls at which your bike need to be stopped. In such situations, it is better to put your bike in neutral and kill the switch. Even the motionless bike engine consumes petrol which can now be controlled.

Bike-handle

Clutch, Brakes, and Gear

We understand the necessity of clutch, brakes, and gear in a heavily crowded city like Kathmandu. All three parts must be used at all times. The clutch needs to be pressed to avoid the killing of the engine in a jam where you constantly need to brake and gear down to the lowest gear. Such activities consume more petrol than necessary. Hence, minimizing such usage when you can make a big difference in your consumption of petrol and a fat wallet.

Clutch-Brakes-Gear

Avoid parking your bike under direct sun

Petrol is a substance that evaporates fast even if you keep it in a vessel. When you park your bike under the direct sun, the heat evaporates the petrol at a fast rate. Therefore, try to avoid parking your bike when there is no shade above it.

Bike-parking

Tire Pressure

The tire pressure should also be regularly monitored. The pressure must be approximate as per the bikes tire type and capacity which is mentioned in the brochures. If the pressure tends to be high or low than required, the bike cannot give its best performance and consumes more petrol to provide the optimum show.

Tire-Pressure-maintenance

Also Read:

5 BIKE CARE AND MAINTENANCE TIPS TO KEEP YOUR BIKE FOREVER NEW

THE BEST OFF ROAD BIKES IN NEPAL

WHAT IS HILL START ASSIST? HOW DOES IT WORK ?

CROSSFIRE GR7: SPECIFICATION AND PRICE IN NEPAL | 2019

ELECTRIC VEHICLES | CARS | BIKES: ADVANTAGES AND DISADVANTAGES

NEW UPCOMING BIKES IN NEPAL 2020 | SPECS, PRICE EXPECTATION

WHAT ARE HYBRID ELECTRIC CARS AND HOW DO THEY WORK?

 

For more reviews, news, and articles click to reviews.com.np

For instant access to the contents, follow us on our Facebook Page

For videos, subscribe to our Youtube Channel

Compiled by : Debashish S Neupane Debashish S Neupane

Tips to keep the exterior of your car new and shiny.

12th September 2020
"Exterior car care should become a regular part of your car care routine."

Your car is probably your most important investment. It takes a year-round beating from general wear and the elements. This wear and tear will show if you don’t regularly care for and maintain it. Whether it’s cleaning, waxing or making repairs and maintenance, exterior car care should become a regular part of your car care routine. Take some time to review the following car care tips to keep your vehicle running at its optimum condition.

Step 1: Wash It  

One of the best car care tips you can receive is to keep the exterior of your car clean. Washing your car often can remove harmful debris and reduce the chance of your car rusting. Choose a shady spot in which to work. It’s usually best to wash your car in the morning or evening when the sun isn't as intense, but if you have a spot in the shade to do the job, it doesn’t matter what time of day you start. Let the car exterior cool down if it has been in the sun for an extended period of time.

Car-wash-shampoo

Fill a bucket with a couple of capfuls of concentrated car cleaning solution and water (check manufacturer's directions for the exact amount of cleaner to use). Wet down the entire surface of the car using a garden hose with a spray nozzle. Dip a sponge or washing mitt into the bucket and start on the roof of the car.

Using the sponge or washing mitt, wash the roof of the car and clean the windows. Stop there and rinse. You want to wash and rinse the car in sections to avoid the soap's drying on the surface before you spray it off. Choose either the hood or trunk of the car, clean it and rinse it. Continue working by washing either the front or back (depending on where you chose to continue) and then rinsing. Then proceed down one side of the car, one panel at a time, washing and rinsing. Repeat these steps on the opposite side. Don't forget to wash the rearview mirrors.

Car-wash-tire-body

Wheels and tires should be cleaned last. Since they make contact with the road and collect the most oil, dirt and grime, it makes more sense to clean the rest of the car first so you don't transfer dirt from them to the rest of the car. Grit from the tires and lower panels of the car can also stick to your sponge and then scratch your car's paint elsewhere. Wet the wheels with your hose and then spray a wheel and tire cleaner onto them. Let the solution sit for a minute or two and then wash them with the washing mitt and soap. Rinse them off.

Step 2: Dry It  

Dry the car using soft, clean towels that you keep specifically for drying your car, or better yet, use microfiber drying towels or chamois. Chamois, commonly known as shammies are leather cloths, designed to soak up water better than a regular towel and help prevent water spots.

Step 3: Apply Protectants  

After the vehicle has dried, pour (or spray) a dab of vinyl and rubber protectant onto a clean rag and wipe it on all vinyl, plastic, or rubber parts on the vehicle exterior. These will most likely include door and window moldings, trim, rearview mirrors, and tires.

Car-protectant

Wipe with a circular motion for complete and even coverage. Wait for the protectant to be absorbed. Once it is absorbed, the surface will look and feel dry. Then with a new, clean rag, wipe down the parts.

Step 4: Wax It  

Waxing your car protects the paint and finish. In essence, it seals the exterior and protects it from the elements, UV rays, salt, splattered insects and bird droppings, while it leaves the car looking shiny and new. Wax usually comes as a paste, liquid or cream. There is endless debate about which brand or type of wax to use, but most car enthusiasts prefer a carnauba-based wax in any form. One application of this wax usually lasts about six to eight weeks.

waxco-wash-wax-car-shampoo

Before applying, either dip an applicator pad into the wax container (for pastes and creams) or pour a small amount onto the pad (liquid). Many waxes are sold with applicator pads, but they can also be purchased separately.

Apply wax to one section or panel of the vehicle at a time. Start by framing the section which is applying the wax along the edges in a straight line. This gives you better control and helps prevent getting wax in and on unwanted areas, like plastic or rubber trim. Then fill in the rest of the area by wiping the wax on in a circular motion. As it dries, the wax will form a haze. This usually just takes a few minutes. Use a clean, soft microfiber cloth to wipe away the haze. Try to use one small section of the cloth when wiping each area, so you still have a clean cloth to wipe the next section. Repeat this process over the entirety of the car's finish.

Also Read:

TOP SCOOTERS IN NEPAL 2020 | 125 CC | PRICE

TOP TEN CAR ACCESSORIES

2020 FORD ECOSPORT BS-6 LAUNCHED IN NEPAL

TOP 5 SUVS IN NEPAL IN 2020 | UPDATED PRICE

NEW UPCOMING ELECTRIC CARS IN NEPAL 2020

TOP 5 PICKUP TRUCKS IN NEPAL

Compiled by : Reviewer Team Reviews